Suspension system NVH testing

Optimising noise, vibration, and harshness characteristics early in the design process.

What is NVH?

Noise, vibration, and harshness (NHV) is a field dedicated to the analysis and mitigation of noise and vibration attributes in vehicles. It’s a critical aspect of vehicle design, affecting both performance and user experience. NHV testing involves exposing a complete vehicle, or a component or subassembly to vibrations across various frequencies. This helps in identifying potential issues or annoyances.

NVH issues can often remain undetected until late in a vehicle development programme, which can lead to costly and compromised corrective measures. Our ANVH 250 test machine enables accurate measurement of suspension system NVH transmission long before prototype vehicles are available.

How the ANVH 250 works

The ANVH 250 simulates the structural propagation of vibrations from the tyre contact patch through the suspension system to the vehicle body by injecting high-frequency test signals into the axle spindles. Up to six bespoke electro-magnetic actuators apply precisely controlled motion at frequencies from 0-250Hz and displacements from +/-0.01 to +/-50mm, while tri-axial load cells measure the forces transmitted to each vehicle body mounting point.

The ANVH 250 can apply sinusoidal, random input and road load data displacements to the suspension system. Displacements can be applied to the wheel hubs in the vertical (Z), longitudinal (X) or lateral (Y) directions. The paired displacements at the hubs can be in-phase, anti-phase or single-sided. By analysing the resultant forces, accelerations and displacements, sources of structural resonance can be identified, isolated and optimised.

Specifications

The ANVH 250 is a sophisticated axle-level test machine that accurately measures NVH transmission through a suspension system into a vehicle body.

The changing automotive landscape is making it more important than ever to get NVH right. The ANVH 250 solution includes the following features:

  • Closed loop control 0-250Hz
  • All electric design
  • Up to 10 kN pneumatic pre-load per actuator
  • Up to 10 kN peak force per actuator
  • K&C testing option
  • Accommodates a wide range of subassembly types and sizes

Get the ANVH 250

"*" indicates required fields

This field is for validation purposes and should be left unchanged.
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.